Solar Panel Mount

DESCRIPTION of Solar Panel Mount

• Sky elevation bracket * Qty: 1
• Sky dish bracket * Qty: 1
• 37mm U-bolts - Qty:4
• Bolts (15mm Long, 13mm Head) & Washers - Qty:4

USES of Solar Panel Mount

• Normally used in conjunction with a Galvanised mast to allow a solar panel to be mounted at a set angle

PROCEDURE to Mount a Solar Panel

• Mount a Galvanised mast in the ground
• or off a wall using a set of 18" TK Brackets
• Insert the the 2 U-bolts through the holes on the back of the elevation bracket and tighten on the nuts 3-4 turns
• Slide the elevation bracket down over the top of the galvanised mast
• Position the bracket to point in the required direction
• Tighten the nuts on the u-bolt using a 10mm spanner so as to lock the bracket into position
• The bracket is now ready to have a panel mounted onto it !