On a gable wall of a house to ensure aerial is above roof line of neighbouring buildings if possible so as to have a clear line of sight towards the transmitter tower.
Steps to Install
Position ladder to left (if right handed) of where the bracket is to be mounted
Secure the ladders and put on all safety equipment
Ascend the ladder with the drill, tools, bolts and sky bracket
After selecting desired location use 8mm bit to drill guide holes
Now use 10mm bit to drill hole
Use ratchet and 13mm socket to bolt on bracket to the wall using the plastic plugs and coach bolts (qty:4)
Use ratchet and 10mm socket to tighten side U-bolts on the brackets so that the arm is square to the wall and tighten. *caution do no overtighten or thread on bolts will wear.