![]()
DESCRIPTION of 5x16 Satellite & Terrestrial Multiswitch
- Smart Titanium Multiswitch 5x16
- Inputs: 5
- Horizontal High (22 KHz)
- Horizontal low
- Vertical High (22 KHz)
- Vertical Low
- Terrestrial
- Outputs: 16 satellite feeds
Frequencies:
- Terrestrial: 47 - 862 MHz
- Satellite: 950 - 2300 MHz
- Colour: Gray Silver
- Manufacturer: Smart Electronics
- Connector type: F-type Connectors
Note: Always used with Quattro LNB
USES of 5x16 Satellite & Terrestrial MultiSwitch
- Used in conjuction with a Quattro LNB and a 80cm dish to distribute the satellite and sometimes Terrestrial TV signal to a number a number of TV points
- Capable of giving good results on both Satellite and Terrestrial output.
Used extensively in
- Apartment blocks
- Small Hotels
- B&Bs
HOW the 5x16 Satellite & Terrestrial MultiSwitch Works
Quattro Vs Traditional LNB
- Traditional LNB which simply feeds a Satellite receiver from each output
- Quattro LNB splits the satellite signal into
- Vertical (High & Low)
- Horizontal (High & Low)
- This allows the signal to to feed to an infinite amount of Satellite points
How a Quattro LNB and Multiswitch work
- Used in conjunction with a Quattro LNB (normally mounted on an 80cm dish) whose 4 outputs are broken into
- Vertical (High & Low)
- Horizontal (High & Low)
- Multiswitch inputs:
- satellite: 4 from satellite quttro LNB satellite
- Terresttial: a single feed covering full VHF / UHF Spectrum
- satellite: 4 from satellite quttro LNB satellite
- Multiswitch range:
- Outputs: 8, 16 or 32 outputs to Satellite receivers
- At the TV Point:
- Use a Faceplate to split the signal into Satellite and terrestrial
ADVANAGES of 5x16 Satellite & Terrestrial MultiSwitch
- This unit with a single 80cm satellite dish can feed a medium sized apartment block
- Works well with both satellite and Terrestrial
- Can be very cost efficient on medium sized commerical jobs
- This multiswitch is part of Smart Electronic top of the range 'TITANIUM' swtiches
DISADVANAGES of 5x16 Satellite & Terrestrial MultiSwitch
- A Sky dish with an Octo LNB is more practical for small jobs requiring less than 8 satellite feeds and no terrestrial signal
- Alignment and setup can be very complicated and frustrating - this unit is not for the DIYer
- Need to plan properly and use high quality cable CT100 or CT165 if it is to work corrrectly through a large scheme
- MUST ONLY BE used with a Quattro LNB
- Maximum limit of this unit is 16 outputs or 8 sky+HD receivers, which often is not sufficient e.g. for a block with 9 apartments each which require 2 satellite feeds - would require 18 outputs.






